BOPP Matt Film

* BOPP MATT FILM FOR BOARD LAMINATION
& ADHESIVE TAPE


Characteristics

Special designed of BOPP film for board lamination with
matt finished on one side. Providing low electrostatic
charge, one side or both sides corona treatment.
The matt side will eliminate light reflection for soft
viewing.







* TECHNICAL DATA

-------------------------------- 15 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 15
Yield / m2/kg(min.)/ - / : 80
Density / g/cm3 / ASTM D-1505 / : 0.81
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 8
/ (min.) / TD D-882-83 / : 18
Elongation at break / % / MD ASTM / : 220
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.20-0.40
Half Decay Time / seconds(max.)/STATIC HONEST METER / :
200
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 50
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 11
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 2,700
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 18 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 18
Yield / m2/kg(min.)/ - / : 67
Density / g/cm3 / ASTM D-1505 / : 0.83
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 8
/ (min.) / TD D-882-83 / : 18
Elongation at break / % / MD ASTM / : 220
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.20-0.40
Half Decay Time / seconds(max.)/STATIC HONEST METER / :
200
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 50
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 9
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 2,300
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 20 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 20
Yield / m2/kg(min.)/ - / : 60
Density / g/cm3 / ASTM D-1505 / : 0.83
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 8
/ (min.) / TD D-882-83 / : 18
Elongation at break / % / MD ASTM / : 220
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.20-0.40
Half Decay Time / seconds(max.)/STATIC HONEST METER / :
200
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 50
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 8
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 2,000
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : max. 800 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request


Thank you for your kind attention.


With Best Regards,

Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com