BOPP Coextruded Film

Characteristics

Excellent merchantability, high strength, heatsealable
on both sides, dimensional stability and flatness,
designed for high-speed workability, low-friction, high
stiffness, good concealment, elegant appearance, heat
resistant and heat shrinking capabilities, matted side
finish

Applications Specific Uses/Products

Flexo Printing (white film, pearlized opaque film, matt film), Cigarette Wrapping and Over Wrapping labels, packaging material for ice bars, bread and candies, gift wrappers, book covers, shopping bags, cigarette wrapper, casette/CD/videotape wrapper, stationery wrapper, food and chocolate box wrapper


* BOPP CO-EX FILM FOR PRINTING & LAMINATION

Is widely used in packaging printing and laminating
applications. Our co-extruded film offer excellent
machinability, good heat seal strength, good
dimensional stability and flatness.


* TECHNICAL DATA

-------------------------------- 20 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 20
Yield / m2/kg(min.)/ - / : 55
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 200
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.30-0.40
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 100
Half Decay Time /seconds(max.) /Static Honest Meter / :
300
Haze /% (max.) /ASTM D-1003-61 / : 2.5
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 75
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 8
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 2,000
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 25 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 25
Yield / m2/kg(min.)/ - / : 44
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 200
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.30-0.40
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 150
Half Decay Time /seconds(max.) /Static Honest Meter / :
300
Haze /% (max.) /ASTM D-1003-61 / : 3.0
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 75
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 6
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,800
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 30 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 30
Yield / m2/kg(min.)/ - / : 37
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 200
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.30-0.40
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 200
Half Decay Time /seconds(max.) /Static Honest Meter / :
300
Haze /% (max.) /ASTM D-1003-61 / : 3.0
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 75
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 4
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,600
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 40 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 40
Yield / m2/kg(min.)/ - / : 27
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 200
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.30-0.40
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 200
Half Decay Time /seconds(max.) /Static Honest Meter / :
300
Haze /% (max.) /ASTM D-1003-61 / : 3.5
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 75
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 3
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,400
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request


Thank you and Best Regards,


Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com


* BOPP CO-EX FILM FOR CIGARETTE WRAPPING LOW H/S


Special formulated for cigarette wrapping application
designed to process in high speed automatic machine.
Our film provide low friction and high stiffness
properties, with exceptional low heatseal & high seal
strength on both sides.


* TECHNICAL DATA

-------------------------------- 21 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 21
Yield / m2/kg(min.)/ - / : 52
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 15
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 180
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 3.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 4.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.20-0.35
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 150
Haze /% (max.) /ASTM D-1003-61 / : 2.2
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 75
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 8
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 2,000
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 350 mm
Width Range : 100 mm - 400 mm.
(other width on request)
Length Range : Standard 2,000 m., 4,000 m.

Further technical information on request


Thank you and Best Regards,


Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com


* BOPP CO-EX FILM METALLIZED GRADE

Special designed for vacuum metallized application.
Excellent metal adhesion and both sides heat sealable
with good seal strength.


* TECHNICAL DATA

-------------------------------- 20 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 20
Yield / m2/kg(min.)/ - / : 55
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 200
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.50-0.70
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 125
Sealing Strength / g/cm(min.) / - / : 100
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 75
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 8
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 2,000
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 25 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 25
Yield / m2/kg(min.)/ - / : 44
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 200
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.50-0.70
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 125
Sealing Strength / g/cm(min.) / - / : 100
Haze /% (max.) /ASTM D-1003-61 / : 2.5
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 75
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 6
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,800
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request


Thank you and Best Regards,


Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com


* BOPP CO-EX FILM FOR CIGARETTE WRAPPING

Special formulated for cigarette wrapping application
designed to process in automatic machine, 200 packs
per minute. Our film provide low friction and high
stiffness properties, heatsealable is good on both
sides.


* TECHNICAL DATA

-------------------------------- 21 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 21
Yield / m2/kg(min.)/ - / : 52
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 15
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 180
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 3.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 4.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.20-0.35
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 120
Sealing Strength / g/cm(min.) / - / : 100
Haze /% (max.) /ASTM D-1003-61 / : 2.2
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 75
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 8
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 2,000
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 350 mm
Width Range : 100 mm - 400 mm.
(other width on request)
Length Range : Standard 2,000 m., 4,000 m.

Further technical information on request


Thank you and Best Regards,


Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com

* BOPP CO-EX FILM PEARLIZED

Is widely used in surface printing and lamination for
packaging applications. Excellent machinability with
both sides heatsealable. Our film show the pearlized
white metallic appearance.


* TECHNICAL DATA

-------------------------------- 25 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 25
Yield / m2/kg(min.)/ - / : 62
Density / g/cm3 / ASTM D-1505 / : 0.6 -0.7
Tensile Strength / kg/mm2 / MD ASTM / : 6
/ (min.) / TD D-882-83 / : 12
Elongation at break / % / MD ASTM / : 140
/ (max.) / TD D-882-83 / : 50
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 80
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 26
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 5.0
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,700
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 30 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 30
Yield / m2/kg(min.)/ - / : 51
Density / g/cm3 / ASTM D-1505 / : 0.6 -0.7
Tensile Strength / kg/mm2 / MD ASTM / : 6
/ (min.) / TD D-882-83 / : 12
Elongation at break / % / MD ASTM / : 140
/ (max.) / TD D-882-83 / : 50
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 80
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 26
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 4.2
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,600
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 35 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 35
Yield / m2/kg(min.)/ - / : 44
Density / g/cm3 / ASTM D-1505 / : 0.6 -0.7
Tensile Strength / kg/mm2 / MD ASTM / : 6
/ (min.) / TD D-882-83 / : 12
Elongation at break / % / MD ASTM / : 140
/ (max.) / TD D-882-83 / : 50
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 80
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 26
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 3.6
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,500
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 40 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 40
Yield / m2/kg(min.)/ - / : 38
Density / g/cm3 / ASTM D-1505 / : 0.6 -0.7
Tensile Strength / kg/mm2 / MD ASTM / : 6
/ (min.) / TD D-882-83 / : 12
Elongation at break / % / MD ASTM / : 140
/ (max.) / TD D-882-83 / : 50
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 80
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 26
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 3.2
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,400
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request


Thank you and Best Regards,


Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com


* BOPP CO-EX FILM PEARLIZED OPAQUE

Is widely used in surface printing for packaging
application. Excellent machinability with both sides
heatsealable. Our film show the pearlized white
opacity appearance.


* TECHNICAL DATA

-------------------------------- 25 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 25
Yield / m2/kg(min.)/ - / : 59
Density / g/cm3 / ASTM D-1505 / : 0.65 - 0.70
Tensile Strength / kg/mm2 / MD ASTM / : 6
/ (min.) / TD D-882-83 / : 12
Elongation at break / % / MD ASTM / : 140
/ (max.) / TD D-882-83 / : 50
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 80
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 26
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 5.0
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,700
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 30 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 30
Yield / m2/kg(min.)/ - / : 49
Density / g/cm3 / ASTM D-1505 / : 0.65 - 0.70
Tensile Strength / kg/mm2 / MD ASTM / : 6
/ (min.) / TD D-882-83 / : 12
Elongation at break / % / MD ASTM / : 140
/ (max.) / TD D-882-83 / : 50
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 80
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 26
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 4.2
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,600
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 35 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 35
Yield / m2/kg(min.)/ - / : 42
Density / g/cm3 / ASTM D-1505 / : 0.65 - 0.70
Tensile Strength / kg/mm2 / MD ASTM / : 6
/ (min.) / TD D-882-83 / : 12
Elongation at break / % / MD ASTM / : 140
/ (max.) / TD D-882-83 / : 50
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 80
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 26
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 3.6
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,500
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


-------------------------------- 40 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 40
Yield / m2/kg(min.)/ - / : 37
Density / g/cm3 / ASTM D-1505 / : 0.65 - 0.70
Tensile Strength / kg/mm2 / MD ASTM / : 6
/ (min.) / TD D-882-83 / : 12
Elongation at break / % / MD ASTM / : 140
/ (max.) / TD D-882-83 / : 50
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 80
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 26
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 3.2
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,400
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request


Thank you and Best Regards,


Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com

* BOPP CO-EX FILM PEARLIZED OPAQUE HIGH GLOSS

Is widely used in surface printing and lamination for
medium speed packaging application. Excellent
machinability with one side heatsealable at low
temperature. Our film show the pearlized white opacity
appearance.


* PROVISIONAL TECHNICAL DATA

-------------------------------- 25 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 25
Yield / m2/kg(min.)/ - / : 59
Density / g/cm3 / ASTM D-1505 / : 0.65 - 0.70
Tensile Strength / kg/mm2 / MD ASTM / : 6
/ (min.) / TD D-882-83 / : 12
Elongation at break / % / MD ASTM / : 140
/ (max.) / TD D-882-83 / : 50
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / Treated / ASTM D-1894 / :
0.30-0.50
Static C.O.F. /film /film / Untreated /ASTN D-1894 / :
0.50-0.70
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 80
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 65
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 5.0
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,700
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request


Thank you and Best Regards,


Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com


* BOPP CO-EX FILM METALLIZED DRY LAMINATION

Special BOPP film designed for top class packaging.
Good gas barrier property with luxury appearance,
heatsealable on non - metallized side.


* TECHNICAL DATA

-------------------------------- 20 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 20
Yield / m2/kg(min.)/ - / : 55
Average Thickness Variation / % (max.)/ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 200
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.50-0.70
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 125
Sealing Strength / g/cm(min.) / - / : 100
Optical Density / (mm) / - / : 2.0
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 3.5
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 400


-------------------------------- 25 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 25
Yield / m2/kg(min.)/ - / : 44
Average Thickness Variation / % (max.)/ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 200
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.50-0.70
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 125
Sealing Strength / g/cm(min.) / - / : 100
Optical Density / (mm) / - / : 2.0
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 3.0
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 340


Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request


Thank you and Best Regards,


Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com


* BOPP CO-EX WHITE FILM FOR PRINTING & LAMINATION

It is widely used in surface printing and lamination
for packaging applications. Excellent machinability
with both sides heatsealable. TFI film shows white
appearance.


* PROVISIONAL TECHNICAL DATA

-------------------------------- 28 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 28
Yield / m2/kg(min.)/ - / : 39
Density / g/cm3 / ASTM D-1505 / : 0.93
Average Thickness Variation / % (max.)/ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 8
/ (min.) / TD D-882-83 / : 18
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.35-0.50
Sealing Temperature / ℃ / 1 Bar 1 Sec / : 115
Sealing Strength / g/cm(min.) / - / : 150
Gloss (Gloss Side, Angle 45 ˚) / % ( min.) /
ASTM D-2457-70 / : 70
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 5
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,700
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38


Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 800 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request


Thank you for your kind attention.


With Best Regards,

Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com