Covercoat, Over Print Lacquer ,Coating,

- COATING (Covrecoat,Over Print Lacquer):

* SD-740, MV-40 (Clear, Yellow,Red) :  Liquid Type Use for Glass & Ceramic Baking Approx.  580 Degree C.

* SD-710 (Clear, Yellow,Red) :  Thixo Type  Use for Glass & Ceramic Baking Approx.  580 Degree C.
* KSC-1500 : Peel-Off Coating that can be screened on the top of the lacquer-based inks and

                    removed after the decal has been applied and dried onto a decorated surface.

* CC-2050  :  Polaroid Photo Printing Ink on Mug.
* HS-101  :  Low Temperature Baking Covercoat below 100 Degree C. For Helmet

PACKAGINGS:

* Square Can Type :

Net 15 Kg / Square Can & Outer by carton box,
36 Cans ( 540 Kgs ) / Pallet.


* Round Steel Drum Type :

Net 17 Kg / Round Drum,
27 Drums ( 459 Kgs ) / Pallet.


MATERIAL SAFETY DATA SHEET ( DATA PREPARED: 1996.9.10 )
=====================================================

-------------------------------------------------------------------------------------------
1. COMPOSITION / INFORMATION ON INGREDIENTS
-------------------------------------------------------------------------------------------

Common Name--------------------CAS-No.---------------------- %

Solvents Naphtha, Aromat-----CAS-No. 64742-95-6----40~60%
Acrylic Resin------------------------CAS-No. 9003-63-8-----30~35 %
Phthelate C16H22O4-------------CAS-No. 1322-94-7-------5~20 %

The manufacturers reserve the right to alter and improve the specifications without notice.


--------------------------------------------------------------------------------------------------
2. Hazards Identification
--------------------------------------------------------------------------------------------------

INHALATION :

EYE CONTACT : Irritating to eyes
SKIN CONTACT: Irritanting to skin

--------------------------------------------------------------------------------------------------
3. FIRST AID MEASURES
--------------------------------------------------------------------------------------------------

3.1 General Remarks :

Bring affected person out of danger area.
Place person on side instable position if unconscious.
Employ mouth-to-mouth resuscitation if breathing ceases.

3.2 Inhalation :

Bring affected person outside and ensure that he/she is comfortable.
Employ mouth-to-mouth resuscitation if breathing ceases.

3.3 Skin contact :

On skin contact, rinse thoroughly with water.
With continous skin irritation, consult doctor.

3.4 Eye Contact

Rinse thoroughtly immediately for at least 5 minutes keeping eyelid open,
Further treatment by eye doctor.

3.5 Ingestition :

Supply with medical care.

--------------------------------------------------------------------------------------------------
4. FIRE-FIGHTING MEASURES
--------------------------------------------------------------------------------------------------

4.1 Suitable extinguishing media :

Usual measures for chemical fires.

4.2 Extinguishing media which must be used for safety reasons

4.3 Special exposure hazards arising from the substance or

preparation itself, combustion products, resulting gases :
Formation of flammable or explosive vapour / air mixtures possible.
Danger of explosion with fire.
Do not inhale explosive gases or smoke fumes.

4.4 Special protective equiptment for fire fighters :


--------------------------------------------------------------------------------------------------
5. ACCIDENTAL RELEASE MEASURES
--------------------------------------------------------------------------------------------------

5.1 Personal Precautions :

Keep person at a distance and stay on them weather side.

5.2 Environmental Precautions :

Dispose of waste in accordence with the legal regulations
issued by the appropriate local and national authorities

5.3 Methods of cleaning up :

Absorb with liquid-binding material (e.g. sand, infusorial earth, inert absorbent ).

5.4 Further Information :

Remove all sorces of ignition.


--------------------------------------------------------------------------------------------------
6. HANDLING AND STORAGE
--------------------------------------------------------------------------------------------------

6.1 Handling :

No dangerous reactions are known to occur with correct handling and storage.
The product should only be handling by trained personel.

6.2 Storage :

Fumes may be released in closed storage rooms or during processing.
Keep containes dry and tightly sealed-even empties.
The product is water dangering.


--------------------------------------------------------------------------------------------------
7. EXPOSURE CONTROLS / PERSONAL PROTECTION
--------------------------------------------------------------------------------------------------

7.1 Additional instructions for technical installation.

Eventual aspiration in case of solvent fumes. Technical protection
measures have always priority over personal protection equipment.

7.2 Ingredients with threshold limit values :

Values of maximum admissible concentration :
500 ppm referring to Solvents Naphtha, Aromat

7.3 Personal Protection

7.3.1 General Protection :

Wash face / hands before break and of work.

7.3.2 Respiratory Protection :

If maximum admissible concentration value at the workplace is
exceeded or you feel trouble, apply respirator with charchol filter.

7.3.3 Eye Protection :

Wear safety goggles with side-shields ( if handling large amounts )

7.3.4 Skin Protection :

Preventive skin protection recommended.

7.3.5 Hand Protection :

Wear protective glove made of solvent-resistent material ( if handling large amounts )


--------------------------------------------------------------------------------------------------
8. PHYSICAL AND CHEMICAL PROPERTIES
-------------------------------------------------------------------------------------------------

8. Physical and chemical properties

8.1 Appearance

8.1.1 Physical state : Fluid

8.1.2 Colour : COLOURLESS or Characteristic

8.1.3 Odour : Characteristic

8.2 Data relevant to safety

8.2.1 Viscosity : ( 25 'C ) -> 11~17.5 Storkes

8.2.2 Flash Point : 42.2 'C ( Closed cup )

8.2.3 Lower Explosion Limits : 1.0 Vol. -%

8.2.4 Upper Explosion Limits : 5.2 Vol. - %


--------------------------------------------------------------------------------------------------
9. STABILITY AND REACTIVITY
--------------------------------------------------------------------------------------------------

9.1 Conditions to avoid :

When heated above flash point and / or with spraying or
atomization, a flammable mixture may form with air.

9.2 Materials to avoid :

(If applicable, information referring to individual components
of the product is given below )

9.3 Hazardous decomposition products :

The product is supplied in a stable form, but if container left open
at room temperature or above, it will lose solvents by evaporation.

9.4 Further information :


--------------------------------------------------------------------------------------------------
10. TRANSPORT INFORMATIOIN
--------------------------------------------------------------------------------------------------

Dangerous goods regulations
RID/ADR/IMDG-Code/ICAO-TL

10.1 Land transport ADR / RID

(interstate / intrastate)
Not restricted

10.2 Inland navigation ADN

For inland navigation consulation necessary :

10.3 Sea transport IMDG

IMDG : Class 9 UN-No. 3062 PG III
Marine pollutant : Yes

EMS : ---- MFAG : ----
Technical name refer to UN-No. :
Enviromentally hazardous substance, liquid, n.o.s. *
Hazardous substance :
Aromatic solvents nephtha.

10.4 Air transport ICAO-YI and IATA-DGR

Not restricted.


--------------------------------------------------------------------------------------------------
11. REGULATORY INFORMATION
--------------------------------------------------------------------------------------------------

Fallow all reguration in your country.


--------------------------------------------------------------------------------------------------
12. OTHER INFORMATION
--------------------------------------------------------------------------------------------------

Reference
Kocosol #100 MSDS. SK Corp.




Thank you for your kind attention.



With Best Regards,

Jim Kim
Sung Do International Co.,Ltd.
60, Mok Dong Joong Ang Buk Ro, Yang Churn-Gu, Seoul, 158-807, South Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com