BOPP Plain Film - Sungdo International Co., Ltd.

Home > Buy Now > Plastic Film > BOPP Plain Film

Decalcomania

Blank Decal Paper

Covercoat, Over Print Lacquer

Printing Medium, Medium Oil

Ceramic Color, Glass Color, Cold Decal Printing Inks

BOPP,CPP,PET,Metallized Film

Thermal Laminating Film

Shrink Film (PVC, PE, PP, PET)

visitors: 116858

Sungdo International Co., Ltd.
[Korea]

Address:
# 502-1,2,18, Mok-dong Yangchurn-gu Seoul 158-807 Korea

Phone:
82-2-26529482

Contact name:
Jimsung Kim , President

BOPP,CPP,PET,Metallized Film

	BOPP Plain Film

Click to enlarge image

Characteristics

Excellent clarity, high tensile strength, good dimensional stability and flatness, low electrostatic charge, corona treatment on one or both sides, waterproof

Applications Specific Uses/Products

Printing, Lamination, Adhesives and Albums packaging
for dry food, ice cream and confectionery items,
stationery bags and wrappers, adhesive tapes, boxes,
photo albums

* BOPP PLAIN FILM FOR PRINTING & LAMINATION
Is widely used in printing and laminating for packaging
application. Our film offer exceptional clarity. Good
dimensional stability, flatness and strength.

* TECHNICAL DATA

-------------------------------- 20 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 20
Yield / m2/kg(min.)/ - / : 55
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.35-0.50
Half Decay Time / seconds(max.)/STATIC HONEST METER / :
600
Haze /% (max.) /ASTM D-1003-61 / : 1.5
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 85
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 8
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 2,000
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 25 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 25
Yield / m2/kg(min.)/ - / : 44
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃ 15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.35-0.50
Half Decay Time / seconds(max.)/STATIC HONEST METER / :
600
Haze /% (max.) /ASTM D-1003-61 / : 1.8
Gloss (Angle 45 ˚) /% (min.)/ASTM D-2457-70 / : 85
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 6
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,800
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 28 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 28
Yield / m2/kg(min.)/ - / : 39
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃ 15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.35-0.50
Half Decay Time / seconds(max.)/STATIC HONEST METER / :
600
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) /% (min.)/ASTM D-2457-70 / : 85
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 5
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,700
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 30 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 30
Yield / m2/kg(min.)/ - / : 37
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃ 15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.35-0.50
Half Decay Time / seconds(max.)/STATIC HONEST METER / :
600
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) /% (min.)/ASTM D-2457-70 / : 85
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 4
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,600
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 38 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 38
Yield / m2/kg(min.)/ - / : 29
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃ 15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.35-0.50
Half Decay Time / seconds(max.)/STATIC HONEST METER / :
600
Haze /% (max.) /ASTM D-1003-61 / : 2.2
Gloss (Angle 45 ˚) /% (min.)/ASTM D-2457-70 / : 85
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 4
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,400
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 40 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 38
Yield / m2/kg(min.)/ - / : 27
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃ 15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.35-0.50
Half Decay Time / seconds(max.)/STATIC HONEST METER / :
600
Haze /% (max.) /ASTM D-1003-61 / : 2.2
Gloss (Angle 45 ˚) /% (min.)/ASTM D-2457-70 / : 85
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 3
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,200
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request

Thank you and Best Regards,

Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel : (82)(2) 652-9482 / 9483
Fax : (82)(2) 651-5648
e-mail : SDICOM@chollian.net

* BOPP PLAIN FILM FOR ADHESIVE TAPE

Special formulated for adhesive tape application.
Excellent bonding strength to glue coating , good
dimensional stability and high tensile strength.

* TECHNICAL DATA

-------------------------------- 25 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 25
Yield / m2/kg(min.)/ - / : 44
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.4-0.6
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 95
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 6
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,900
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 28 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 28
Yield / m2/kg(min.)/ - / : 39
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.4-0.6
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 95
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 5
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,700
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 30 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 30
Yield / m2/kg(min.)/ - / : 37
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.4-0.6
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 95
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 4
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,600
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 35 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 35
Yield / m2/kg(min.)/ - / : 32
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.4-0.6
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 95
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 4
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,400
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 40 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 40
Yield / m2/kg(min.)/ - / : 28
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.4-0.6
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 95
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 4
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,200
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 45 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 45
Yield / m2/kg(min.)/ - / : 25
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.4-0.6
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 95
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 3
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,100
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 50 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 50
Yield / m2/kg(min.)/ - / : 22
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.4-0.6
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 95
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 3
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,000
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request

Thank you and Best Regards,

Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel : (82)(2) 2652-9482 / 9483
Fax : (82)(2) 2651-5648
e-mail : SDICOM@chollian.net

* BOPP PLAIN FILM FOR BOARD LAMINATION

Designed especially for board lamination.
Excellent clarity, very good strength, dimensional
stability and flatness. Providing low electrostatic
charge without additives blooming, available for one
side and both sides corona treatment.

* TECHNICAL DATA

-------------------------------- 12 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 12
Yield / m2/kg(min.)/ - / : 92
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 200
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.35-0.50
Half Decay Time / seconds(max.)/STATIC HONEST METER / :
300
Haze /% (max.) /ASTM D-1003-61 / : 1.2
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 85
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 13
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 3,000
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 15 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 15
Yield / m2/kg(min.)/ - / : 73
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 200
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.35-0.50
Half Decay Time / seconds(max.)/STATIC HONEST METER / :
300
Haze /% (max.) /ASTM D-1003-61 / : 1.2
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 85
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 11
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 2,700
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request

Thank you and Best Regards,

Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel : (82)(2) 2652-9482 / 9483
Fax : (82)(2) 2651-5648
e-mail : SDICOM@chollian.net

* BOPP PLAIN FILM METALLIZED GRADE

BOPP non heatsealable film specially designed for
vacuum metallizing application. Our film offer
excellent clarity property. After metallizing process,
film provides exceptional shiny metallic appearance
with low adhesion of aluminum.

* TECHNICAL DATA

-------------------------------- 18 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 18
Yield / m2/kg(min.)/ - / : 61
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Haze /% (max.) /ASTM D-1003-61 / : 1.5
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 95
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 50 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 50
Yield / m2/kg(min.)/ - / : 22
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃ 15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) /% (min.)/ASTM D-2457-70 / : 95
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request

Thank you and Best Regards,

Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel : (82)(2) 2652-9482 / 9483
Fax : (82)(2) 2651-5648
e-mail : SDICOM@chollian.net

* BOPP PLAIN FILM FOR PHOTO ALBUM

Special formulated for photo album application.
Excellent clarity good dimensional stability flatness
and strength. Available for one side, both sides and
non corona treatment.

* TECHNICAL DATA

-------------------------------- 40 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 40
Yield / m2/kg(min.)/ - / : 27
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 95
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 2.5
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,600
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

-------------------------------- 50 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 50
Yield / m2/kg(min.)/ - / : 22
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃ 15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Haze /% (max.) /ASTM D-1003-61 / : 2.0
Gloss (Angle 45 ˚) /% (min.)/ASTM D-2457-70 / : 95
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 2.0
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,500
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request

Thank you and Best Regards,

Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel : (82)(2) 2652-9482 / 9483
Fax : (82)(2) 2651-5648
e-mail : SDICOM@chollian.net

* BOPP FILM SUPER CLEAR

Special formulated for industrial application. Excellent
surface energy for coating , good dimensional
stability, high tensile strength, with good appearance
& very low haze.

* TECHNICAL DATA

-------------------------------- 25 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 25
Yield / m2/kg(min.)/ - / : 44
Density / g/cm3 / ASTM D-1505 / : 0.90
Average Thickness Variation /%(max.) /ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Haze /% (max.) /ASTM D-1003-61 / : 0.6
Gloss (Angle 45 ˚) / % (min.)/ASTM D-2457-70 / : 95
WVTR /g/m2/24 hr (max.) /ASTM E-96 / : 6
O2TR / cc/m2/24 hr (max.) /ASTM D-1434 / : 1,900
Corona Treatment /Dyne/cm (min.)/ ASTM D-2578 / : 38

Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request

Thank you and Best Regards,

Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel : (82)(2) 2652-9482 / 9483
Fax : (82)(2) 2651-5648
e-mail : SDICOM@chollian.net

* BOPP PLAIN METALLIZED FILM

BOPP Metallized film non - heatsealable designed for
decorative & industrial applications. Our film
provide exceptional shiny metallic appearance with
low adhesion of aluminum bonding strength.

* TECHNICAL DATA

-------------------------------- 20 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 20
Yield / m2/kg(min.)/ - / : 55
Average Thickness Variation / % (max.)/ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Optical Density / (mm) / - / : 2.0

-------------------------------- 25 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 25
Yield / m2/kg(min.)/ - / : 44
Average Thickness Variation / % (max.)/ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Optical Density / (mm) / - / : 2.0

-------------------------------- 30 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 30
Yield / m2/kg(min.)/ - / : 37
Average Thickness Variation / % (max.)/ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Optical Density / (mm) / - / : 2.0

-------------------------------- 40 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 40
Yield / m2/kg(min.)/ - / : 27
Average Thickness Variation / % (max.)/ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Optical Density / (mm) / - / : 2.0

-------------------------------- 50 MICRON

Typical Properties/ Unit/ Test Methods/ Typical Value: /

Thickness / Micron / Micrometer/ : 50
Yield / m2/kg(min.)/ - / : 22
Average Thickness Variation / % (max.)/ASTM E-252-78 / :
±3
Tensile Strength / kg/mm2 / MD ASTM / : 13
/ (min.) / TD D-882-83 / : 24
Elongation at break / % / MD ASTM / : 170
/ (max.) / TD D-882-83 / : 70
Thermal Shrinkage / % / MD ASTM / : 4.0
/(120 ℃15 minutes)/ (max.) /TD D-1204-84 / : 2.0
Static C.O.F. /film/film / ASTM D-1894 / : 0.40-0.60
Optical Density / (mm) / - / : 2.0

Description of Supply

Paper Core I.D. : 76 mm (3 in.) 152 mm (6 in.)
Roll O.D. : Max. 600 mm
Width Range : 100 mm - 1,500 mm.
(other width on request)
Length Range : Standard 4,000 m., 6,000 m.

Further technical information on request

Thank you for your kind attention.

With Best Regards,

Jim Kim
Sung Do International Co.,Ltd.
502-1, Mok-Dong, Yang Churn-Gu, Seoul, 158-807, Korea.
Tel : (82)(2) 2652-9482 / 9483
Fax : (82)(2) 2651-5648
e-mail : SDICOM@chollian.net
Homepage : http://www.ec21.com/sdicom